11/05/2023 09:01:41 | server name: [PREMIUS]
11/05/2023 09:01:41 | version: 1.32.28 (Persistent Database) (Mar  5 2015, 12:09:43)
11/05/2023 09:01:42 | Available job disk space  D:\JobPath:  1907542 MB
11/05/2023 09:01:42 | Available system disk space:  474337 MB
11/05/2023 09:01:41 | Register Presetting: License found
11/05/2023 09:01:42 | Booting video kernel ...
11/05/2023 09:01:42 | system ident: 901b0ea0fb2f
11/05/2023 09:01:43 | remote started
11/05/2023 09:01:43 | client link ID= 16605828, [PREMIUS]
11/05/2023 09:01:43 | total remote connects: 1
11/05/2023 09:01:43 | start checking devices ...
11/05/2023 09:01:43 | Current Directory C:\Program Files\BST\Genius\ConfigPath
11/05/2023 09:01:43 | CAN bus master.cfg ok
11/05/2023 09:01:54 | found: Id: 16 -CanPc- Vendor: ESD GmbH Class Sub: CAN-PCI / 331-1
11/05/2023 09:01:56 | CAN Channel 0 Id:17 BUS OFF
11/05/2023 09:01:56 | found: Id: 17 -CanRegPc- Vendor: ESD GmbH Class Sub: CAN-PCI / 331-0
11/05/2023 09:01:56 | Basic CAN bus controller for register control ok
11/05/2023 09:01:56 | found: Id: 81 -Trav- Vendor: Dunkermotoren Class Sub: mcDS
11/05/2023 09:01:56 | found: Id: 61 -Lens- Vendor: BST-International Class Sub: VC 2000 KAM-Board
11/05/2023 09:01:56 | found: Id: 71 -Sync- Vendor: BST-International Class Sub: VC 2000 IO/Sync-Board
11/05/2023 09:01:56 | found: AMI Sync Board connected via USB
11/05/2023 09:01:56 | found: Id: 61 -Flash- Vendor: BST-International GmbH Class Sub: VC 2000 KAM-Board
11/05/2023 09:01:56 | printunits installed: 8
11/05/2023 09:01:56 | found: Id: 0 -Reg- Vendor: BST-International Class Sub: Register-Control Can-Standard 32Bit 1m 
11/05/2023 09:01:59 | found: -IEEE1394- Vendor: Unibrain Class Sub: Fire Board 400
11/05/2023 09:01:59 | found CamCFGFile : C:\Program Files\BST\Genius\ConfigPath\Cam1.cfg
11/05/2023 09:01:59 | Camera1 : HITACHI-KOKUSAI HV-F22F   S/N : 16778484
11/05/2023 09:01:59 | found: Id: 129 -Cam- Vendor: HITACHI-KOKUSAI Class Sub: HV-F22F
11/05/2023 09:01:59 | create: -FrameGrb- Vendor: BST Class Sub: virtual device
11/05/2023 09:01:59 | notfound: -FrameGrb- 
11/05/2023 09:01:59 | found: Id: 151 -RS232Pc- Vendor: BST-International Class Sub: RS232
11/05/2023 09:01:59 | found: Id: 161 -Futec- Vendor: BST-International Class Sub: Futec
11/05/2023 09:01:59 | found: Id: 171 -ChartInterface- Vendor: BST-International Class Sub: ChartInterface
11/05/2023 09:02:01 | starting devices ...
11/05/2023 09:02:01 | CAN-PCI / 331-1 / IO port
11/05/2023 09:02:02 | CAN-PCI / 331-0 / IO port
11/05/2023 09:02:04 | CAN Channel 0 Id:17 BUS OFF
11/05/2023 09:02:04 | mcDS / traverse
11/05/2023 09:02:19 | Traverselength 2529
11/05/2023 09:02:22 | VC 2000 KAM-Board / optical lens
11/05/2023 09:02:24 | Lens Reference   - Zoom : 678 / 75  - Iris : 706 / 14  - Focus : 678 / 38
11/05/2023 09:02:24 | VC 2000 IO/Sync-Board / machine syncronization
11/05/2023 09:02:25 | CanOpen abort domain!
11/05/2023 09:02:25 | CanOpen abort domain! (2x)
11/05/2023 09:02:25 | VC 2000 KAM-Board / flash control unit
11/05/2023 09:02:25 | Register-Control Can-Standard 32Bit 1m  / 
11/05/2023 09:02:25 | Fire Board 400 / IO port
11/05/2023 09:02:25 | HV-F22F / camera
11/05/2023 09:02:29 | Camera : feature value protected ; Fi: FIREi_STATUS_SUCCESS
11/05/2023 09:02:54 | Camera : HITACHI-KOKUSAI HV-F22F Sw Rev. IEEE1394:2.03/1.51 Cam:2.20/1.20
11/05/2023 09:02:54 | Camera : HITACHI-KOKUSAI HV-F22F Video Format : 1280 x 960
11/05/2023 09:02:54 | start camera receive engine on channel 0 ; Fi: FIREi_STATUS_SUCCESS
11/05/2023 09:02:54 | virtual device / framegrabber
11/05/2023 09:02:54 | RS232 / IO port
11/05/2023 09:02:54 | Futec / 
11/05/2023 09:02:54 | ChartInterface / 
11/05/2023 09:02:54 | starting devices ok
11/05/2023 09:02:54 | devices ready to use
11/05/2023 09:02:54 | Number of connected cameras: 1
11/05/2023 09:02:54 | Lens distortion file "C:\Program Files\BST\Genius\ConfigPath\Caldata1.bin" not found
11/05/2023 09:02:54 | Lens distortion file "C:\Program Files\BST\Genius\ConfigPath\Caldata.bin" not found
11/05/2023 09:02:54 | Using non-warp defaults!
11/05/2023 09:02:54 | Cam #1: PixelSize for register measurement ( big marks ) will be derived from the lens and FOV settings
11/05/2023 09:02:54 | AutoReg (large)::LoadCal() no camera info available in cal. file for cam. #1
11/05/2023 09:02:54 | Lens distortion (small mark) file "C:\Program Files\BST\Genius\ConfigPath\CaldataSmallMark1.bin" not found
11/05/2023 09:02:54 | Using non-warp defaults!
11/05/2023 09:02:54 | Cam #1: PixelSize for register measurement ( small marks ) will be derived from the lens and FOV settings
11/05/2023 09:02:54 | AutoReg (small)::LoadCal() no camera info available in cal. file for cam. #1
11/05/2023 09:02:54 | Autoregister: Enabling fast mark search by default
11/05/2023 09:02:54 | Grey scale (R) file "C:\Program Files\BST\Genius\ConfigPath\CaldataGreyscaleR1.bin" not found
11/05/2023 09:02:54 | Grey scale (R) file "C:\Program Files\BST\Genius\ConfigPath\CaldataGreyscaleR.bin" not found
11/05/2023 09:02:54 | DD Special Application found "0" (no special app). Using standard defect detection
11/05/2023 09:02:54 | DD Texture detection will assume image stability 100 on a scale of 0 to 100
11/05/2023 09:02:54 | BColourCalibration::LoadCal() cam #1: some files were not loaded! Not using calibration
11/05/2023 09:02:54 | DD System Setup: Texture and Misregister detection are disabled (raw 0)
11/05/2023 09:02:54 | Zoom function file "C:\Program Files\BST\Genius\ConfigPath\CaldataZoomfunction1.bin" not found
11/05/2023 09:02:55 | Warp function file "C:\Program Files\BST\Genius\ConfigPath\CaldataView1.bin" not found
11/05/2023 09:02:55 | LoadLensCal: Camera 1 uses 0 zoom and 0 warp calibration control points
11/05/2023 09:02:55 | database-version: 3.20.8
11/05/2023 09:02:55 | switch to set: Production
11/05/2023 09:02:55 | create job: default
11/05/2023 09:02:55 | CanOpen abort domain!
11/05/2023 09:02:55 | CanOpen abort domain! (2x)
11/05/2023 09:02:56 | switch to set: Production
11/05/2023 09:02:56 | load job: default
11/05/2023 09:02:56 | Video kernel ready now ...
11/05/2023 09:02:56 | reload system settings from database
11/05/2023 09:02:56 | switch to set: Production
11/05/2023 09:02:58 | * StartupTestModeSequence Begin... *
11/05/2023 09:02:58 | simulation test mode on
11/05/2023 09:02:58 | process position: -1 (restore last state)
11/05/2023 09:02:58 | switch to set: Production
11/05/2023 09:02:59 | BChartInterface: Serial Interface COM4 connected
11/05/2023 09:03:14 | * StartupTestModeSequence End... *
11/05/2023 09:03:14 | simulation test mode off
